Bezzera · Traditional espresso
B2013 AL
B2013 AL uses lever-operated brewing groups for a traditional espresso service. The barista operates each lever to initiate the extraction cycle, giving the machine a different working rhythm from Bezzera's pump-driven commercial models. An AISI 304 stainless-steel body houses a boiler sized to the group configuration. One-, two- and three-group versions allow the platform to suit different bar layouts. Optional gas heating is available for suitable installations; it is a heating option, not a statement that the machine needs no energy. Plan adequate overhead clearance for the raised levers and confirm the correct electrical and plumbing specification with GBN.
At a glance
A commercial lever espresso machine in one-, two- or three-group formats.
Tell GBN about your menu, service volume, counter layout and water setup. We will confirm the right configuration and current Myanmar availability before an order is placed.
Technical reference
Specification highlights.
This page keeps the important configuration notes in the GBN catalogue. Final electrical, plumbing, dimensions and options can vary by market and selected configuration.
- Extraction / groups
- Lever-operated; 1, 2 or 3 groups
- Body
- AISI 304 stainless steel
- Boiler, 1 / 2 / 3 groups
- 5 / 11 / 17 L
- Width, 1 / 2 / 3 groups
- 490 / 670 / 850 mm
- Depth / body height
- 495 / 520 mm
- Maximum lever height
- 780 mm; allow operating clearance
- Net weight, 1 / 2 / 3 groups
- 42 / 56 / 75 kg
- Electrical versions
- 220–415 V; 50/60 Hz, configuration dependent
- Heater, 1 / 2 / 3 groups
- 1,850–2,200 / 4,500 / 4,600–5,450 W; confirm selected supply
- Water / drain connections
- G 3/8-inch inlet; G 3/4-inch drain
- Heating option
- Optional gas heating; installation requirements apply
Source note: Bezzera official B2013 AL product information and configuration table. GBN updates product references as manufacturer catalogues change.
Need a complete setup?